Perfect Simple Tips To Repair A Car Music System
Posted by Rob King on February 4th, 2010
|
Car stereo is one of the best companions that you can get during your long travel in the car. And in recent times many FM radio stations have come in almost all the cities in the country. So, almost everybody listens to songs in FM radios during their road trips in their car. If your car stereo stops working, it really irritates you a lot. How to Repair a Car Audio System?
There are few tools required for accomplishment of this task. The usage of such tools will reduce the man power required and makes it easy to complete the task. It may include a set of new fuses,a screw driver, a fuse puller.
There is a dash board which surrounds the stereo in the car. It covers all the components and wiring that come into the stereo. To repair the stereo one must remove the dash board first. The dash board is fixed to the car stereo rigidly by use of screws. So in order to remove the dash board first we have to unscrew the connecting screws with the help of a screw driver of a suitable size. The dash board is removed from the stereo and placed aside until the operation gets over.
After removing the screws and pulling out the dash board then the stereo is also pulled out. Next the wiring is removed from the stereo so as to look at the problem inside it without causing any damage to any parts of the wire or the machine parts. In all the stereos there will be a black cable connecting the antenna to the stereo. This is used for radio reception. This wire is also unplugged from the stereo like the other wires.
Next step one must use a fuse puller for removing the fuse wire from the stereo. This is important because it is very delicate and sensitive and might get damaged while performing the operation. These fuse are present in the back side of the stereo.
The damage in the fuse wire can be found in three ways one if the wire running into the fuse wire is broken or if the color of the fuse wire changes to black that is it is burnt and the last way to find the damage is very simple that is the fuse will be melted or blown. If any of the three is noticed then it is mandatory to change the fuse wire.
By doing the above steps, the audio system is generally fixed. In case it does not get proper, there could be a problem in the fuse of the car that connects with the audio system. Using a manual of the car, the fuse box is located. In that, the fuse that connects the radio can be located with the help of the diagram in the manual. After that it is removed by using a set of fuse pullers. The fuse is examined. If there are signs of the fuse being blown out, it is replaced with new fuse.
This article on how to repair a car audio system discusses on two major types of faults that occur with the stereo. There could be a blown out fuse either in the car or in the radio.
Learn more about Auto. Visit the Author Name’s site where you can find out all about Car stereo and what it can do for you.
Mail this postPopularity: 4% [?]
Print This Post